What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
Last Updated: 25.06.2025 10:40
Here is a simplified AC power diagram.
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
The other is “what does a “fuse” do?”
It seems Mohan does not understand the difference between a comment and an Answer.
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
President Trump kicked Zelensky out of the White House. Is it over for a deal?
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
It also is a device that limits the change in current flow.
What is a good habit and what is bad one?
I post the exact comment here.
Upvotes:
(Dc diagram shown, AC is similar).
The bolt then partially travels down the line to your home.
For this case there are devices called Metal oxide varistors (MOV).
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
How much does a doctor earn in Sweden per month?
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
Edit 2024–10.
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
How can I remove decimals in math?
He then describes the function of a fuse.
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
Because the load is inductive, the current lags the voltage.(by a bit).
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
First Sentence:
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
China Rare-Earth Magnet Maker Gets Green Light for US Exports - Bloomberg
So, the voltage could go up to 500 volts, and the fuse will not open up.
One
what exactly is a ‘surge’ protector?
a photo is worth a thousand words.
But it can get overloaded, and no longer works.
The MOV will conduct when the voltage exceeds 50% of line voltage.
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
An AC voltage/ current source, and an ac inductive load.
In schematic diagrams this is the symbol for a fuse:
23andMe Sets New Auction With $305 Million New Bid From Ex-CEO - Bloomberg
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
At one ohm, the resistor has a maximum of 1 watt power.
This device then solves the entire problem.
Stroll needed "urgent medical attention" for pain after qualifying - FIA · F1 - RaceFans
He then describes Rainy Season and Lightning.
nine
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
What are the most extreme examples of hypocrisy?
2024–10–14 [Omar Gharbi Omar Gharbi ]
the problem then depends on "how fast does the fuse operate?".
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
Used vehicle prices ease from tariff fear-buying highs but remain elevated - CNBC
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
There are three different concepts here that are getting confused.
Now when you have a certain ac resistance, then a current flows in a loop.
Infrared contact lens enables humans to see in dark - DW
This is 'the assistant's answer'
This is where the MOV conducts again, and dissipated the energy.
A fuse is a non-resetable over current circuit protector.
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
A circuit breaker is similar, but is resettable.
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
2024–10–16 [ OO OLAOYE OYEBODE ]
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
Barnstars:
2024–10–10[John johnson John Johnson ]
There are two important concepts here.
But… the neutral is now “floating” because of the 1 ohm resistance.
What is lightning?
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
This is where this question deviates from being a 'generic' question, and becomes more specific.
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
but I think this circuit , shows a few more pieces.
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
Can the fuse protect the electronic devices from lightning instead of a surge protector.
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
The third is lightning and “how it gets conducted into a home.”
What does a fuse do?
One is “what exactly is in a ‘surge protector’ ? ”
This one hit behind the barn.
He then asserts :
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
These are simplified answers to the original question, and does not change anything I wrote above.
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
but this device (an Inductor) … impedes the rapid changes in the current.
This is the picture of an electronic coil of wire wound around a core of magnetic material.
These devices are installed between the “hot” and “neutral” and protective ground.
eight
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
At least they know the answer if they wanted it.
[old diagram got deleted by accident]
so, what happens?
[image of Common-mode choke]
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.